Steps of RHEL 7.3 VM setup
Repeating the following steps several times to install multiple RHEL 7.3 VMs
Run virt-manager to start UI
you will see the Virtual Machine Manager UI:
Create new VM
Click to start create a new VM, a new wizard will be pop up.
1. Choose the installation type
Note that the Network install be selected.
2. Paste the image URL
3. Set Memory and CPU
4. Create the Disk
5. Ready to Install
Set up Bridge
Once VM start up, it can connect to the internet, but the physical machine can not connect to VM, so set up bridge is necessary.
/etc/sysconfig/network-scripts/ifcfg-br0file with the following contents
DEVICE=br0 ONBOOT=yes BOOTPROTO=dhcp TYPE=Bridge
/etc/sysconfig/network-scripts/ifcfg-enp0s25to mapping to the bridge created above
DEVICE=enp0s25 ONBOOT=yes BRIDGE=br0 ZONE=public
# service network restart